Our customer had a little fender bender and instead of getting plain stock lights he contact us for a custom build. His only request was to black out the headlight internally and gave us the go ahead to fit the light with what we though performed best and looked best. For this retrofit we painted and cleared coated everything inside the headlight. We retrofitted a Morimoto D2S Bixenon projector with Apollo 3 shroud that fit this light perfectly. To add a little flare we added Morimoto color changing demon eyes to the retro.
Finished up this sweet FX6R retrofit that turned out to look like a transformer! We used a Morimoto D2S Bixenon Projector along with Gatling Gun 2.0 Shrouds painted Vivid Red Cocktail. Behind the shroud we fitted a switchback LED ring and also fitted Amber LEDs in the diamond section of the headlight.
Check out this 2015 Taco retro we just finished up! Our customer let us do whatever we wanted to this retro to make it look good on his white Tacoma. We got him a set of new lights and retrofitted them with Morimoto Mini H1 projectors. To cover the projectors we used Apollo 3 shroud color matched to our customers truck. For bells and whistles we added color changing demon eyes and color changing halos!
Finished up a unique retrofit this week. The retro is unique due to its side mounted bulbs which leaves very little options for projectors we can use. Luckily we had a set of Lexus IS250 with a STI clear lens on our shelfs that we managed to fit in these lights without major modifications and retained the housing stock and looking OEM. We painted the housing black with a coat of clear coat. The projectors had Morimoto color changing demon eyes added for a little show.
Finished up an awesome retro today! We added a Morimoto H1 Bixenon projector to the stock Grand Cherokee headlight and covered it with a E46 shroud. The customer wanted a red halo and after some discussion we decided to drill out the every dimple on the shroud and put the halo behind it it for a stealthy look. The housing was painted gloss black with a mopar red two tone shroud.
Finally had time to build a retrofit for our personal truck! We used 2013+ Ram headlights for our donor light. We ditched the stock halogen projector and replaced it with a Morimoto FXR projector etched with the ram symbol. We painted the housing with OEM Bright White and White Gold Metallic. What you don't see is the upgraded LED boards from Diode Dynamics that are White/Amber switchbacks, also lets not forget the clear side marker provided for us by the Retroshop.
Well lets start the week with one clean OEM looking retro thats actually a pretty crazy build! This retro features quad bixenon projectors with Morimoto D2S projectors with E46 shrouds on bottom and Morimoto H1 projectors with Gatling Gun shrouds up top. If you look closely at the blinker area we also carefully cut out the amber and replaced it with a projector lens. In the side marker area we installed a Morimoto switch back led strip that lights up the whole area just perfectly! We kept the whole retro chrome as per customers request for that OEM look.
Well this was one sick paint job. I wish we had more pictures but our camera decided it didn't want to save any before we closed them up and packed them away. Thank god for camera phones. Gotta have it green paint stripe and green demons eyes finished off with a gloss black paint job.
Lets introduce the HULK? Well just reminds us of the hulk cause of all the green we added to this retro. This is a big boy Neon retro with a FXR projector which is one of the best on the market. The FXR projector was covered with a Apollo 2 and painted a nice gloss black. To match the retrofits we also retrofitted some fogs lights using the famous blazer fog lights and painted gloss black to match. The headlights were outfitted with a green halos, green demon eyes, and green demon eyes in the fog lights.
Lets start of monday with a fresh Dodge Neon retrofit painted OEM Graphite Metallic. The retrofit used a Morimoto H1 Bixenon projector mounted on our special brackets for perfect alignment. We used a Apollo 3 shroud and added red demon eyes for a little bit of bling. Enjoy!
Good evening everyone. We finished this build this weekend for our personal 2011 Dodge Ram. We got some aftermarket LED taillights, ripped them apart and color matched the inside. After reassembly we also color matched the outer boarder of the lens and cleared the whole taillights. Oh and lets not forget the third brake light that received the same treatment.
Well this was a fun retro. We retrofitted a S2K projector tuned with E30 lenses in the low beam and Morimoto H1 Bixenon projector in the high beam. For shrouds we used a E46 shroud and a mini Gatling gun shroud. The housing was painted flat black with partial chrome shroud.
Taco TUESDAY! well this might be more popular in california then anywhere else but tacos and a taco retro sound like an awesome Tuesday to use. We used a Morimoto FXR Bixenon projector for this build with a Apollo 2 shroud. Our customer requested an OEM look so we provided that for him. We painted the headlight partially with satin black paint job and left enough chrome to make the retrofit pop and look OEM.
Well this is a special build for us. This build is for a crazy truck that will in SEMA later this year. The build had every upgrade possible and of course to finish it off some crazy headlights. We built a functional quad Morimoto Mini H1 Bixenon retrofit. The build has quad color changing demon eyes and color changing halo. We used a Panamara shroud for the main projector and a Mini Gatling Gun Shroud for the secondary projector. The whole headlight was painted gloss black, with tinted reflectors, and flat black shroud.
Good evening everyone, we finished these a couple of weeks back for our mechanic responsible for the build of our show/drag neon. This is the third retrofit we have built for him and I think its safe to say he likes our retros. We used a Mini H1 Bixenon projector in his housing with a E46 shroud. The fit was tight but we made it work and finished everything off with a satin black paint job.
Happy Fathers Day! This is our last build for the week before we enjoy a nice fathers day. This build features a Morimoto H1 Bixenon projector with Apollo 3 Shroud. Our customer requested a subtle look with a little flash. To do this we painted the whole housing gloss black and added red demon eyes and red halos that can only be seen when turned on.
This is a special build for one of returning customers. This build was made with a Morimoto H1 Bixenon projector and Apollo 3 shrouds. This build features a custom lens blinker with Morimoto switch back led ring behind it. In addition we added the new Morimoto RGB demon eyes to the build. The whole build was finished up with a nice satin paint job.
These were made for one of our BWM fanatic customers that owns by our count now 3 classics bmws. After doing a set for his E34 he was hooked on that output of the Morimoto H1 BiXenon Projectors. He had us make another identical set for his E30 with minor upgrades. On the outside the headlight looks completely stock until you flip a switch and activate the super bright color changing LEDS and of course the insane output of the upgraded projector.
Happy Hump Day Everyone! Just finished up these Dodge Neon Headlights painted in OEM Graphite Metallic. We used a Morimoto H1 Bixenon projector for this build attached to our custom made bracket for perfect alignment. The projector was covered with a Apollo 3 shroud which is outfitted with Morimoto color changing led ring behind it. To add on to all the lighting mods we also fitted some purple demon eyes into the build. Of course as always fresh RetroRubber was used to seal these lights up for moisture free life.
Such a clean retrofit! Nothing like a retrofit that looks like it came from the factory. We used a Morimoto H1 bixenon projector mounted on our custom bracket for perfect vertical and horizontal alignment. To close off the projector we added a Apollo 2 projector shroud along with fresh Retro Rubber to avoid any moisture exposure.
It's what's on the inside that counts. This build was done for a customer that wanted an OEM look that packs a punch. We retrofitted a Morimoto H1 Bixenon projector into the housing with E46 extended shroud that fit like a glove. For a touch of flash, Amber demon eyes were added.
What a great way to end the week with these gorgeous F250 headlights. For this build we used an aftermarket OEM replica headlight fitted with a Morimoto H1 Bixenon projector and Apollo 2 Shroud. Behind the shroud is a Morimoto switchback LED ring, white for running lights and amber for turn signals, and of course red demon eyes for the extra "wow" factor. We used all OEM paint for this build, for the housing we used Ford UD Ebony paint and the reflector was painted Ford G3 Pueblo Gold Metallic.
Have a great weekend everyone!
Posted by Administrator on 5/28/2015
Good evening, its almost Friday and one more build done. This build was done for an Evo X using aftermarket Depo Headlights. We upgraded the inadequate halogen projector to a Morimoto Evo X-R projector paired with a Morimoto D2S HID kit. The housing received an awesome gloss paint job and added RetroRubber for better sealing. We custom cut what we now call a "moon halo" into the housing with purple lighting behind it and purple demon eye mod to complete the build.